B01410 - M4x10mm BUTTON HEAD SCREW (8pcs)

Racers necessary item for adjustment of any space of clearance. The decal is identifying every size of shim. Size of decal 50mm x 35mm

Adjustment tool that fits directly onto clutch nuts such as IF18-3 and IF15-2. The flat top surface makes it easy to apply force when tightening the nut and enables easy installation even with hard clutch springs.

INFINITY silicone diff oil, formulated from pure silicone oil and carefully manufactured under strict viscosity control to provide the stability when making setup changes. Now available in 3000, 7000 and 9000 versions. The lineup now includes 3000 to 10000 in increments of 1000, allowing for finer tuning of the differential depending on track conditions.

Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.

Hexagonal wrench for adjusting the steering knuckle and rear hub adjusting nut (10mm cap screw) of IF18 and IF15.
The hexagonal wrench has a flange, which makes work much more efficient than a regular hexagonal wrench. The ultra-lightweight machined aluminum grip is finished perfectly with the Team INFINITY logo and black and red anodizing. The overall thickness and knurling position have been optimized to provide an excellent grip.
The bit is made of carbide steel for high durability.

The screws and E-rings included in the IF18-2 kit are now available for sale as individual items. The screws used in the INFINITY kits are made of high strength steel and made in Japan. The fit when tightened is perfectly matched to the IF18-2. Recommended as standard and also setting parts.

The screws and E-rings included in the IF18-2 kit are now available for sale as individual items. The screws used in the INFINITY kits are made of high strength steel and made in Japan. The fit when tightened is perfectly matched to the IF18-2. Recommended as standard and also setting parts.

High-precision machined aluminum spacer with black color alumite treatment. Larger outer diameter (8 mm) than standard aluminum spacers makes them suitable for use in locations where large forces are applied.

Replacement for #R0213

Hexagonal wrench for adjusting the steering knuckle and rear hub adjusting nut (10mm cap screw) of IF18 and IF15.
The hexagonal wrench has a flange, which makes work much more efficient than a regular hexagonal wrench. The ultra-lightweight machined aluminum grip is finished perfectly with the Team INFINITY logo and black and red anodizing. The overall thickness and knurling position have been optimized to provide an excellent grip.
The bit is made of carbide steel for high durability.

IF14 Speciale / IFB8 Compatible Turnbuckle Adjustment Tool
A dedicated tool for 4mm and 5mm turnbuckles is here!
Its thicker, longer design allows for firm force application and smooth, precise adjustments boosting work efficiency.
The tip is heat-treated, robust carbon steel with a plated finish for high durability. A reliable tool built to last. Perfect for maintaining your IF14 Speciale or IFB8!

The team T-shirts that INFINITY team drivers have been wearing for many years is now available in the latest “5-Star” version! The team T-shirt that has been the center of attention since it was worn by INFINITY team drivers is now available in the latest “5-star version” in two colors: bright pink and fresh gray. Available in two colors, bright pink and fresh gray, this 5.3-ounce T-shirt is of moderate thickness and made of 100% cotton. It is smooth to the touch and comfortable to wear. Available in S / M / L / XL / 2XL / 3XL / 4XL

Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.

Stainless steel shim with an inner diameter of 3 mm, outer diameter of 4 mm, and thickness of 0.1 mm.
The outer diameter is smaller than that of a standard shim while maintaining an inner diameter of 3 mm, allowing you to make adjustments to the clearance of shafts and other parts that were previously not possible.

The standard screws for the IF14-2 kit available in 10pcs packs. The screws used in all INFINITY kits are made of high performance steel and made in Japan. They are extremely stable and strong when tightened. Recommended not only as a spare part but also as a setting option.

INFINITY Team Hoodie has been renewed with the World Champion "4 Star" design!


The "4 Star" design represents the number of World Championships Team INFINITY has won. The design is a subtle yet proud reflection of Team INFINITY's brilliant achievements to date. Although it is a thin type, it is brush lined for a comfortable feel and excellent warmth retention. Seven sizes are available: S/M/L/XL/2XL/3XL/4XL.

DISCONTINUED

New 2018 T-shirt for INFINITY Team Drivers