R0223 Body Stiffener L-Type 1/8 Racing (Carbon Graphite) - Individual Plastic Rivet for Sale.
This update includes:
Newly developed shock pistons
Newly developed shock plastic parts
Newly developed shock shafts
G300 includes the short shock-type shock stay (G215).
Newly Developed Shock Pistons:
The new 4-hole pistons are designed to provide more damping at higher piston speeds, resulting in a more stable car behavior and improved drivability.
The total hole area is the same as the 2 × 1.1 mm or 3 × 0.9 mm pistons, making it easier to quantify and tune your setup.
Newly Developed Shock Plastic Parts:
The damper ends now feature a flanged design, and the spring retainer system has been revised to allow for an additional 2 mm of stroke.
Two types of spring retainers are included: one with the same specification as the previous model, and one that lowers the spring position by 2 mm.
Lowering the spring allows it to move more freely, increasing grip.
Newly Developed Shock Shafts:
With revised shaft lengths—G299: 28.5 mm, G300: 25.5 mm—the new shock shafts, when used in combination with the newly designed plastic parts, enable the IF15-2 to utilize its full shock stroke potential.
INFINITY Team Hoodie has been renewed with the World Champion "4 Star" design!
The "4 Star" design represents the number of World Championships Team INFINITY has won. The design is a subtle yet proud reflection of Team INFINITY's brilliant achievements to date. Although it is a thin type, it is brush lined for a comfortable feel and excellent warmth retention. Seven sizes are available: S/M/L/XL/2XL/3XL/4XL.
Best suited double faced adhesive tape to attach RC devices such as receiver and speed controller onto objects. Appropriate flexibility to fit comfortably. Amazing compatibility of strong adhesion force and clear surface after peeling off. 20x100mm reed-shaped 4pcs. Thickness 0.75mm.
A 20pcs pack of button head screws, as used in the Aluminum & Titanium Screw Set. High rigidity 7075 material is used allowing you to tighten the screws firmly. A great value pack.
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
DISCONTINUED
Team Infinity T-shirt USA edition. As worn at the 2019 IFMAR 1:8 ONROAD WORLD CHAMPIONSHIPS.
The screws and E-rings included in the IF18-2 kit are now available for sale as individual items. The screws used in the INFINITY kits are made of high strength steel and made in Japan. The fit when tightened is perfectly matched to the IF18-2. Recommended as standard and also setting parts.
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
Team Infinity T-shirt USA edition. As worn at the 2019 IFMAR 1:8 ONROAD WORLD CHAMPIONSHIPS.
A plastic case that is convenient for storing and managing small parts such as shims and washers. A set of 7 in a 3 compartments case (76x24x17mm). The INFINITY shim set is recommended with an identification label sticker that matches this case. External dimensions: Approximately 86x179x20mm
The standard screws for the IF14-2 kit available in 10pcs packs. The screws used in all INFINITY kits are made of high performance steel and made in Japan. They are extremely stable and strong when tightened. Recommended not only as a spare part but also as a setting option.
The standard screws for the IF14-2 kit available in 10pcs packs. The screws used in all INFINITY kits are made of high performance steel and made in Japan. They are extremely stable and strong when tightened. Recommended not only as a spare part but also as a setting option.
The team T-shirts that INFINITY team drivers have been wearing for many years is now available in the latest “5-Star” version! The team T-shirt that has been the center of attention since it was worn by INFINITY team drivers is now available in the latest “5-star version” in two colors: bright pink and fresh gray. Available in two colors, bright pink and fresh gray, this 5.3-ounce T-shirt is of moderate thickness and made of 100% cotton. It is smooth to the touch and comfortable to wear. Available in S / M / L / XL / 2XL / 3XL / 4XL
Aluminum end caps are now available to further enhance your Infinity Tool Series. The tool series which are already on the market feature high quality, cool appearance, excellent workability and comfort when working on your car. In addition to the bright red color with markings to recognize the type of tool at a glance, the cap is free to rotate when attached to the tool grip. This allows the user to hold the cap in the palm of the hand while turning the tool with the fingertips, enabling fine and continuous work.
The screws and E-rings included in the IF18-2 kit are now available for sale as individual items. The screws used in the INFINITY kits are made of high strength steel and made in Japan. The fit when tightened is perfectly matched to the IF18-2. Recommended as standard and also setting parts.
The Team INFINITY official T-shirt -our classic “BLACK T”- has been updated to the latest “5-Star Edition.” Made from 100% cotton with a moderate 5.3-ounce weight, it feels smooth against the skin and is comfortable to wear.
Available sizes: S / M / XL / 2XL / 3XL / 4XL
Please note: Size L is currently out of stock.
DISCONTINUED replaced by A2150
This 5mm hex wrench is made from aluminium giving you a premium feel in your hand. Perfect for adjusting R0070 cap screw without damaging the ball screw inside the wheel hub. For IF18, IF15 and other brands.
R0223 Body Stiffener L-Type 1/8 Racing (Carbon Graphite) - Individual Plastic Rivet for Sale.
