- New
TS053 - SHOCK PISTON 1.2x4 HOLE (4pcs)
This update includes:
Newly developed shock pistons
Newly developed shock plastic parts
Newly developed shock shafts
G300 includes the short shock-type shock stay (G215).
Newly Developed Shock Pistons:
The new 4-hole pistons are designed to provide more damping at higher piston speeds, resulting in a more stable car behavior and improved drivability.
The total hole area is the same as the 2 × 1.1 mm or 3 × 0.9 mm pistons, making it easier to quantify and tune your setup.
Newly Developed Shock Plastic Parts:
The damper ends now feature a flanged design, and the spring retainer system has been revised to allow for an additional 2 mm of stroke.
Two types of spring retainers are included: one with the same specification as the previous model, and one that lowers the spring position by 2 mm.
Lowering the spring allows it to move more freely, increasing grip.
Newly Developed Shock Shafts:
With revised shaft lengths—G299: 28.5 mm, G300: 25.5 mm—the new shock shafts, when used in combination with the newly designed plastic parts, enable the IF15-2 to utilize its full shock stroke potential.
16 other products in the same category:
G017-52 - 2nd SPUR GEAR 52T
Optional parts (IF15 / IF15W / IF15-2 / IF15-2W)
The previously unavailable 52T has been added to the lineup.
Used with a 20T/52T combination instead of the conventional 21T/55T.
M134 - WHEEL HEX HUB +1mm (2pcs)
This wider wheel hex modifies the vehicle's handling characteristics by altering steering feel and vehicle roll stiffness. It is versatile for use on both the front and rear ends, enabling smoother steering when mounted at the front and improved traction when mounted at the rear.
B01205T - M2x5mm TITANIUM HEX SOCKET HEAD SCREW (4pcs)
Hex socket head screws machined from high-quality 6-4 titanium material.
With a larger head outer diameter (approximately 3.7mm) than the typical button head, they allow for secure fastening of parts.
A0098XL - INFINITY TEAM T-SHIRT (PK) XL Size
The team T-shirts that INFINITY team drivers have been wearing for many years is now available in the latest “5-Star” version! The team T-shirt that has been the center of attention since it was worn by INFINITY team drivers is now available in the latest “5-star version” in two colors: bright pink and fresh gray. Available in two colors, bright pink and fresh gray, this 5.3-ounce T-shirt is of moderate thickness and made of 100% cotton. It is smooth to the touch and comfortable to wear. Available in S / M / L / XL / 2XL / 3XL / 4XL
G286 - STAINLESS REAR STIFFENER SET(IF15-2)
Mounted in the opening at the rear of the main chassis, it increases chassis rigidity at the rear end of the chassis and increases weight by approximately 13g to ensure stable rear grip. It is also effective when the track surface is high grip and traction roll occurs.
Use with G230 Carbon Rear Stiffener Set to expand the range of setting.
CM-A005-05 - ALUMINUM WASHER 3x6x0.5mm (Red/10pcs)
A vivid red anodized version has been added to the aluminum spacer series (3mm in inner diameter). It helps you dress up your machine. If you use this red anodized version and the black version in different specifications in a setting, you can easily distinguish them.