T100 - ALU HEX WHEEL HUB (4.5mm/Black/2pcs)

Alignment tool to accurately assemble the IF14-2 lower bulkhead, upper bulkhead and shock tower.

Adjust the chassis flex by connecting this carbon brace between the upper bulkheads on top of the top deck. This upper bulkhead brace is cut with high precision from 1mm carbon plate and can change the steering and traction characteristics by effecting the rigidity of the front or rear bulkheads.

Front of top deck: Good balance between high-speed and low-speed corner.
Rear of top deck: Good balance between rotation and traction.

Standard part for T265.

Narrower than kit standard (5mm). Aluminum hex wheel hub series. Width can be set more narrow.
When used on the front, it improves steering response. When used on the rear, it improves traction.

Cooling fan mount made of composite material that is half the weight of aluminum and super lightweight.

This spacer sits between the lower suspension block and the chassis to adjust the roll center. With a thickness of 0.2mm it's possible to achieve fine detailed setup.

This is a new set of super strong and high-precision 4.9mm titanium ball ends for the IF14. Each set is about 8g lighter than the steel ones and the polished ball surface ensures the ball end moves smoothly for a long time.

This spacer sits between the lower suspension block and the chassis to adjust the roll center. With a thickness of 0.2mm it's possible to achieve fine detailed setup.

An aluminum cooling fan mount that can be bolted to the floating electronic plate with a 30mm fan for motor cooling.

Short type (41mm) front drive shaft rather than the kit standard front drive shaft (42mm).
Offers a linear steering feel, making the car easier to drive when used in high traction or oversteer situations.

This spacer sits between the lower suspension block and the chassis to adjust the roll center. With a thickness of 0.2mm it's possible to achieve fine detailed setup.

Spare Part for IF14-2 Team Edition

Spare Part for IF14-2 Team Edition