T144 - WHEEL SHIM 0.5mm (SUS/8pcs)
By adding these wheel shims between the hex wheel hub and the wheel, you can fine-tune the cars track width quickly. Available in two thicknesses of 0.25mm and 0.5mm. 8pcs are included in each.
16 other products in the same category:
T303 - USP GRAPHITE FLEX REAR SHOCK TOWER (for HBP)
By reducing the rigidity of the rear shock tower connecting point to the upper bulkhead, the stiffness around the rear bulkhead is reduced and the overall chassis flex is increased allowing for smoother rear rotation. For HBP (Horizontal body post)
T249 - IF14-2 BULKHEAD ALIGNMENT TOOL SET
Alignment tool to accurately assemble the IF14-2 lower bulkhead, upper bulkhead and shock tower.
T274 - ULTRA LOW FRICTION LOWER ARM OUTER SHAFT (Rear/2pcs)
High precision and high strength stainless steel lower arm shafts plated with a special lubricant to reduce resistance and provide ultra smooth suspension movement. Offers ultimate suspension performance.
T260 - IF14-2 TITANIUM BALL END 4.9mm SET (18pcs)
This is a new set of super strong and high-precision 4.9mm titanium ball ends for the IF14-2.
Each set is about 8g lighter than the steel ones and the polished ball surface ensures the ball end moves smoothly for a long time.
T235 - IF14-2 PASSIVE REAR STEERING (PRS) SET
The advanced "PRS system" is designed to deliver faster cornering speeds for the IF14-2. This system allows for the rear toe angle to be controlled passively as a result of the rear suspension arm stroke. The cornering characteristics can be fine-tuned by adjusting the mounting angle of the linkage rod.
T256 - FLOATING ELECTRONIC PLATE MOUNT (Black)
Spare part for floating electronic plate set. The plate can also function as a center chassis stiffener by adding one more screw to the chassis.
T251 - CENTER WEIGHT 15g
Spare part for floating electronic plate set. It can be used alone as a balance weight or can function as a chassis stiffener by adding one more screw to the chassis.
T265 - ADJUSTABLE REAR HBP MOUNT SET
HBP (Horizontal Body Post) mount set. For mounting the body posts in a horizontal position at the rear end of the car. By mounting the rear body posts horizontally the center of gravity around the rear of the car is lowered and the downforce of the body is transmitted more efficiently to the chassis improving corner speed. Especially suited to tracks with tight corners.
T163-SH - FRONT SUSPENSION ARM (Graphite/Super Hard)
An extra hard lower suspension arm using a graphite material. This arm is more stiff than the original kit version and is suitable for high grip tracks and in situations when you want to improve initial steering response.