16 other products in the same category:
G151 - SHORT SHOCK CASE (2pcs)
Spare parts for repairing short shocks that can be used for IF15/IF15W.
Dedicated one O-ring specification.
The overall length has been reduced to the utmost limit to achieve a low center of gravity.
Teflon coated surface for smooth operation.
G157 - REAR BELT LONGLIFE TYPE(RUBBER)177
Special rubber with excellent durability is used to achieve longer life than the soft rubber type of the kit's standard parts. Especially effective for IF15W with high grip wide tires.
G010H - UPPER ARM SET (Hard)
"Improved rigidity by using carbon-mixed nylon material. Improves steering response and enables increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, ""H"" mark is printed by laser engraving."
G152 - SHORT SHOCK SHAFT (24mm/2pcs)
Spare parts for repairing short shocks that can be used for IF15/IF15W.
Overall length of 24mm.
G144 - TITANIUM BALL SCREW SET φ8mm (Front/Rear/each 4pcs)
A high-quality 64 titanium ball screw set, when replacing the kit's standard φ8mm ball screws (front/steel, rear/aluminum), they reduce overall weight by approximately 3.3g and provides a light driving feel.
G126 - ADJUSTABLE ONEWAY SHAFT
Replacement parts for G125 Adjustable front one way set. For use when cup and shaft see general wear and tare.
G127 - ADJUSTABLE ONEWAY PLATE SET
This is a spare part for the G0125 B adjustable front one-way set. This set helps control the one-way well even with soft silicone oil. We also recommend replacing the conventional one with this spare part.
G007BH - REAR LOWER ARM SET (Hard)
Improved rigidity by using carbon-mixed nylon material. Stabilizes the rear grip and allows for increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, the ""H"" mark is printed by laser engraving.
Please apply grease to the screw tightening areas when assembling in cold temperature environments.
G150 - SHOCK PISTON (φ0.9x3Holes/2pcs)
This is an option part for short shock for IF15/IF15W. 3 hole - 0.9mm piston. (3 hole - 0.9mm and 2 hole - 1.1mm piston is also available.
This piston is secured with an ultra small screw as used in the IF14-2 to increase stroke.
A dedicated 0.05" inch size tool is required. (A0100) INFINITY 0.05" hex wrench driver.
G006H - FRONT LOWER ARM SET (Hard)
Improved rigidity by using carbon-mixed nylon material. Improves steering response and enables increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, ""H"" mark is printed by laser engraving.