G120 - ALUMINUM WHEEL HEX HUB (4pcs)
16 other products in the same category:
Improved rigidity by using carbon-mixed nylon material. Improves steering response and enables increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, ""H"" mark is printed by laser engraving.
These titanium ball screws contribute to improved grip by adding approximately 0.6 g of weight per ball screw compared to the kit's standard rear ballscrews (made of aluminum). In addition, the use of 64 titanium material with its increased rigidity improves response, especially on low to medium grip surfaces.
IF15/IF15Wに使用可能なショートショック専用のセッティングパーツ。
標準で付属の
2個穴-1.1mmピストンに対して
1個穴-1.3mmピストンはIF18-2のフロント用ピストンと同一サイズ、他に
3個穴-0.9mmピストンのタイプ(G124と同一サイズ)も発売。
ピストンの固定方法をIF14-2同様に極小のビスを採用し、ストロークを確保。
(専用の0.05インチサイズの工具が必要です。→[A0100] INFINITY 0.05" HEX WRENCH DRIVER )
A high-quality 64 titanium ball screw set, when replacing the kit's standard φ8mm ball screws (front/steel, rear/aluminum), they reduce overall weight by approximately 3.3g and provides a light driving feel.
"Improved rigidity by using carbon-mixed nylon material. Improves steering response and enables increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, ""H"" mark is printed by laser engraving."
This shock tower is used in combination with a specially developed short-type shock.
The suspension stroke is equal to that of the standard type, and combined with the low center of gravity, the shocks provide increased response and cornering.
The front and rear mounting positions are also carefully designed to keep the upper and lower mounting surfaces the same.
The upper fixing surface is offset by 1mm to keep the upper and lower mounting surfaces the same, the shape takes advantage of the machined A7075 material.
In the case of use with IF15W the racing body SMJ C235 can be optimized and mounted 3.5mm lower when using G147 short front shock set.
This is a 9.5g chassis weight for IF15. By combining it with 14g and 28 chassis weights, the option parts already available, you can make finer tune-up.
By replacing the original kit plastic part with this high-precision 7075 machined part, all flex and deflection will be eliminated, resulting in excellent consistency and sharp steering characteristics.
This is a spare part for the G0125 B adjustable front one-way set. This set helps control the one-way well even with soft silicone oil. We also recommend replacing the conventional one with this spare part.
Special rubber with excellent durability is used to achieve longer life than the soft rubber type of the kit's standard parts. Especially effective for IF15W with high grip wide tires.
Improved rigidity by using carbon-mixed nylon material. Stabilizes the rear grip and allows for increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, the ""H"" mark is printed by laser engraving.
Please apply grease to the screw tightening areas when assembling in cold temperature environments.
Spare parts for repairing short shocks that can be used for IF15/IF15W.
Dedicated one O-ring specification.
The overall length has been reduced to the utmost limit to achieve a low center of gravity.
Teflon coated surface for smooth operation.