G121-14 - CHASSIS WEIGHT 14g
G121-14 Chassis weight is 14g, half that of G0121 original optional chassis weight. Perfect for making finer setting adjustments. Can be used in all sliding weight positions and front bumper on IF15.
16 other products in the same category:
G150 - SHOCK PISTON (φ0.9x3Holes/2pcs)
This is an option part for short shock for IF15/IF15W. 3 hole - 0.9mm piston. (3 hole - 0.9mm and 2 hole - 1.1mm piston is also available.
This piston is secured with an ultra small screw as used in the IF14-2 to increase stroke.
A dedicated 0.05" inch size tool is required. (A0100) INFINITY 0.05" hex wrench driver.
G127 - ADJUSTABLE ONEWAY PLATE SET
This is a spare part for the G0125 B adjustable front one-way set. This set helps control the one-way well even with soft silicone oil. We also recommend replacing the conventional one with this spare part.
G153 - FRONT SHOCK TOWER (Short/7075)
This shock tower is used in combination with a specially developed short-type shock.
The suspension stroke is equal to that of the standard type, and combined with the low center of gravity, the shocks provide increased response and cornering.
The front and rear mounting positions are also carefully designed to keep the upper and lower mounting surfaces the same.
The upper fixing surface is offset by 1mm to keep the upper and lower mounting surfaces the same, the shape takes advantage of the machined A7075 material.
In the case of use with IF15W the racing body SMJ C235 can be optimized and mounted 3.5mm lower when using G147 short front shock set.
G148 - SHOCK PISTON (φ1.3x1Hole/2pcs)
IF15/IF15Wに使用可能なショートショック専用のセッティングパーツ。
標準で付属の
2個穴-1.1mmピストンに対して
1個穴-1.3mmピストンはIF18-2のフロント用ピストンと同一サイズ、他に
3個穴-0.9mmピストンのタイプ(G124と同一サイズ)も発売。
ピストンの固定方法をIF14-2同様に極小のビスを採用し、ストロークを確保。
(専用の0.05インチサイズの工具が必要です。→[A0100] INFINITY 0.05" HEX WRENCH DRIVER )
G152 - SHORT SHOCK SHAFT (24mm/2pcs)
Spare parts for repairing short shocks that can be used for IF15/IF15W.
Overall length of 24mm.
G236 - REAR UNIVERSAL JOINT SET (Parallel/50mm)
Facilitates adjustment to reduce vehicle width when using wide offset tires.
G154 - REAR SHOCK TOWER (Standard/Carbon)
New rear shock tower features a body mounting position 3.5mm lower than std, contributing to a lower center of gravity.
By using T266 Alu HBP mount (black/2pcs) it is also possible to utilize horizontal style body mounting style.
The shock mounting positions have been reduced to 3 offering increased strength and crash resistance.
G238 - ALUMINUM WHEEL HEX HUB Type-B (4pcs/IF15-2)
Oversized wheel hubs to better fit tires with large wheel hex mounting. Prevents misalignment and increases wheel stability. (Matrix tires recommended).
G007BH - REAR LOWER ARM SET (Hard)
Improved rigidity by using carbon-mixed nylon material. Stabilizes the rear grip and allows for increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, the ""H"" mark is printed by laser engraving.
Please apply grease to the screw tightening areas when assembling in cold temperature environments.
G121-9.5 - CHASSIS WEIGHT 9.5g
This is a 9.5g chassis weight for IF15. By combining it with 14g and 28 chassis weights, the option parts already available, you can make finer tune-up.
G143 - AL CENTER BULK (IF15/IF15W)
This new aluminium center bulkhead ensures chassis rigidity in the center section of the car. Helps with traction and added stability in high grip situations.