TS002LF - PULLEY 38T (Low Friction)

This update includes:
Newly developed shock pistons

Newly developed shock plastic parts

Newly developed shock shafts

G300 includes the short shock-type shock stay (G215).

Newly Developed Shock Pistons:
The new 4-hole pistons are designed to provide more damping at higher piston speeds, resulting in a more stable car behavior and improved drivability.
The total hole area is the same as the 2 × 1.1 mm or 3 × 0.9 mm pistons, making it easier to quantify and tune your setup.

Newly Developed Shock Plastic Parts:
The damper ends now feature a flanged design, and the spring retainer system has been revised to allow for an additional 2 mm of stroke.
Two types of spring retainers are included: one with the same specification as the previous model, and one that lowers the spring position by 2 mm.
Lowering the spring allows it to move more freely, increasing grip.

Newly Developed Shock Shafts:
With revised shaft lengths—G299: 28.5 mm, G300: 25.5 mm—the new shock shafts, when used in combination with the newly designed plastic parts, enable the IF15-2 to utilize its full shock stroke potential.


16 other products in the same category:

CM-A005-30: ALUMINUM WASHER 3x6x3.0mm (Red/10pcs)

A vivid red anodized version has been added to the aluminum spacer series (3mm in inner diameter). It helps you dress up your machine. If you use this red anodized version and the black version in different specifications in a setting, you can easily distinguish them.

  • New

TS112 - LONG TOP DECK (2.0mm)

Designed to deliver stable traction and precise handling across a wide range of track conditions, this one-piece top deck is specially developed for the IF14 SPECIALE. Just like the standard split-type top deck included in the kit, chassis flex can be fine-tuned by adjusting the number of screws (TS072) mounted to the motor mount. This allows for detailed setup customization to match driving style and surface conditions, helping you unlock the full performance potential of your IF14 SPECIALE.

TS144 - CHASSIS BRACE (Front/Graphite)

Chassis Brace for IF14 Speciale – Flex Adjustment Made Easy
A dedicated brace that optimizes chassis flex characteristics near the front and rear bulkheads. Easily installed or removed with just two screws, allowing quick setup changes based on driving conditions.
Constructed from 2mm-thick high-quality carbon graphite, achieving both rigidity and flexibility.