After two years of development, we have finally completed the INFINITY IF15, our new competition GP touring car. Tested and approved by Team INFINITY’s World Champion drivers, the IF15 was designed with the concept of having the lowest-possible center of gravity and easy maintenance. The IF15 provides excellent steering feeling in a wide range of driving situations due to the low center of gravity and quickly changing settings or exchanging differentials and belts is made simple with easy access bulkheads, this is a great advantage in races where you need to find the best setup with only limited time. The kit contains suspension bushes with various roll centre positions, three kinds of front stabilizers and four kinds of rear stabilizers are included so that you can easily tune your IF15 to any track.

 

 

 

IF15 - Main chassis

The 3mm-thick 7075 duralumin main chassis boasts great rigidity and flexibility in perfect balance. Steering characteristics can be adjusted by changing the position of the chassis weight (option part). You can adjust the rigidity of the rear suspension arm by attaching the carbon plate (option part).

IF15 - Rear body mount

The rear body mount securely takes the body shell’s downforce and provides support when refueling.
The rear differential comes with a Kevlar-contained resin case and metal bevel gear.
They contribute to smooth and stable operation and great traction.

 

IF15 - Front bumper

The big aero front bumper has guidelines so that you can easily cut it according to the body shell to be used.
This part provides extra stability to the front of the bodyshell and will improve consistency.
The bumper also offers a position for a screw-in weight (option part) allowing you to adjust the steering characteristics quickly and easily..

 

IF15 - Steering and throttle

The steering and throttle positions are specifically designed for the low-profile-type servo to make the radio plate as low as possible, which allows for a low center of gravity.

 

IF15 - Ackermann

Ackerman can be adjusted in three positions by replacing different inserts in the servo saver.
The upper arm is adjustable with nine locations available to tune for any condition.

 

IF15 - Brake lever

A rigid machined aluminum brake lever is included in the kit as standard.
The brake has a highly-controllable feeling due to carefully-selected brake pad materials and the steel break disk.

 

IF15 - Fuel tank caps

Three kinds of fuel tank cap tips are included for various body shells and fueling styles.

 

IF15 - Shocks

The shock absorber is the same as the one included in the IF18 1/8th GP racing car.
The single O-ring makes the operation smooth and stable.
The shock piston has two 1.1mm holes each at the front and the rear.

 

IF15 - Optional A arm

Optional A arm mounting parts

 

IF15 - Carbon front bumper plate

This is the carbon front bumper plate. Drive performance can be adjusted by changing the rigidity of the bumper, which is exposed to downforce at the front part of the body shell. The bumper plate also makes the car lighter.

 

IF15 - Rear aero disks

By attaching these aero disks to the rear hub, the amount of air deflected into the bodyshell through the rear wheels will be reduced and downforce will be increased.

 

IF15 - Rear universal joint

Rear universal joint for excellent drive efficiency and shaper steering characteristics

 

IF15 - 1st gear pinion (17T)

1st gear pinion gear for faster tracks. 17T

 

IF15 - aluminum wheel hex hub

Precision machined aluminum wheel hex hub. 4pcs. in a set

 

IF15 - 2 Speed transmission

2-speed transmission contains highly-efficient 0.8 module gear. The newly-designed clutch is included. The clutch bell coated with special materials is durable and offers perfect clutch-meet.

 

IF15 - Rear suspension geometry

Rear suspension geometry designed to provide excellent mechanical grip.
Maintenance is easy and replacing the rear differential and rear belt can be done quickly.
Four kinds of stabilizers are included in the kit as standard.

 

IF15 - Front differential

The front differential comes with a Kevlar-contained resin case and resin bevel gears.
The lightweight differential unit reduces understeering.
Three kinds of stabilizers are included in the kit as standard.
The carbon bumper upper plate (option part) increases rigidity of the bumper and the body post and adjust the steering characteristics.

 

IF15 - Front upper suspension mount

The front upper suspension mount is made from high-precision and rigid machined aluminum.
The front drive train uses Kevlar-contained resin pulleys and a rubber belt making it extremely light weight and efficient.

 

IF15 - Belts

A rubber belt and Kevlar-contained resin pulley are also used for the rear drive system for high durability and smooth rotation.

 

IF15 - Rear upper "L" arm

The rear upper "I" arm is included in the kit as standard.
It can be replaced with an "A" arm setup (option part) to accommodate a wide variety of track situations and driving styles.

 

IF15 - Receiver box

The receiver box protects the receiver from fuel and tire dust, reducing the chance of trouble during a race. It also makes the wiring simple.

 

IF15 - Side pulley

This is the side pulley to be used when front and rear rubber tires with the same diameter are used.

 

IF15 - Carbon rear lower arm insert

Carbon rear lower arm insert, drive feeling and traction can be adjusted by changing the arm rigidity.

 

IF15 - Front aero disks

By attaching these aero disks to the front knuckle, the amount of air deflected into the bodyshell through the front wheels will be reduced and downforce will be increased.

 

IF15 - AMB transponder mount

Lightweight and rigid carbon AMB transponder mount

 

IF15 - Spare parts for G053

Spare parts for G053

 

IF15 - 2nd gear pinion (22T)

2nd gear pinion gear for faster tracks 22T

 

IF15 - 28g weight

28g weight to be placed at the center of the main chassis and the front bumper

 

Contacts

For general information please contact us at:
  cm (@) creationmodel.biz
  053-570-5112
  053-570-5113
  3-23-15 Kamijima, Naka-ku, Hamamatu-shi, Shizuoka-ken, 433-8122, Japan