B061012 - 1.2mm E RING (8pcs)

This update includes:
Newly developed shock pistons

Newly developed shock plastic parts

Newly developed shock shafts

G300 includes the short shock-type shock stay (G215).

Newly Developed Shock Pistons:
The new 4-hole pistons are designed to provide more damping at higher piston speeds, resulting in a more stable car behavior and improved drivability.
The total hole area is the same as the 2 × 1.1 mm or 3 × 0.9 mm pistons, making it easier to quantify and tune your setup.

Newly Developed Shock Plastic Parts:
The damper ends now feature a flanged design, and the spring retainer system has been revised to allow for an additional 2 mm of stroke.
Two types of spring retainers are included: one with the same specification as the previous model, and one that lowers the spring position by 2 mm.
Lowering the spring allows it to move more freely, increasing grip.

Newly Developed Shock Shafts:
With revised shaft lengths—G299: 28.5 mm, G300: 25.5 mm—the new shock shafts, when used in combination with the newly designed plastic parts, enable the IF15-2 to utilize its full shock stroke potential.


16 other products in the same category:

CM-A005-05 - ALUMINUM WASHER 3x6x0.5mm (Red/10pcs)

A vivid red anodized version has been added to the aluminum spacer series (3mm in inner diameter). It helps you dress up your machine. If you use this red anodized version and the black version in different specifications in a setting, you can easily distinguish them.

A0119 - INFINITY DIGITAL CASTER ANGLE GAUGE (for SPECIALE)

Digital Caster Angle Gauge for IF14 Speciale
Introducing a digital gauge for easy and accurate measurement of the IF14 Speciale's caster angle! Features a dedicated plate that perfectly fits the Speciale's hub shape, ensuring stable measurements.

Compatible with standard setup gauges for seamless daily adjustments. Features a clear LCD display and USB Type-C charging (cable included) for outstanding usability!

R0382S23 - SWAY BAR STOPPER 2.3mm (IF18-3/2pcs)

New stabilizer stopper for IF18-3 front stabilizer.
By making the contact surface with the bearing spherical, smoother movement of the stabilizer is acheived.
Durability has also been greatly improved by using steel.
Available in 2.3, 2.5, and 2.7mm.

Compatible stabilizers
Stopper 2.3mm (R0382S23): 2.0mm, 2.1mm, 2.2mm, 2.3mm
Stopper 2.5mm (R0382S25): 2.4mm, 2.5mm
Stopper 2.7mm (R0382S27): 2.6mm, 2.7mm

G297 - SHOCK PLASTIC PARTS SET

Optional parts (IF15 / IF15W / IF15-2 / IF15-2W)

The damper end is flanged and the method of holding the spring tray is changed to secure a stroke of 2mm.
The included spring tray comes with two types: the same type as the conventional product, and a type that lowers the spring by 2mm.
By lowering the spring, the "prying" force caused by the up and down movement of the shaft is reduced, and the spring moves softer and increases grip.
Please use with G295/G296.

  • New

M191 - STEERING PLATE (-1, L/R)

By adjusting the Ackermann, handling performance is improved. Depending on the track conditions, switching between the kit-standard M016 steering plates (L/R) expands the range of available setup options.

A0111 - INFINITY CLUTCH NUT ADJUST TOOL

Adjustment tool that fits directly onto clutch nuts such as IF18-3 and IF15-2. The flat top surface makes it easy to apply force when tightening the nut and enables easy installation even with hard clutch springs.

A00972XL - INFINITY TEAM T-SHIRT (GY) 2XL Size

The team T-shirts that INFINITY team drivers have been wearing for many years is now available in the latest “5-Star” version! The team T-shirt that has been the center of attention since it was worn by INFINITY team drivers is now available in the latest “5-star version” in two colors: bright pink and fresh gray. Available in two colors, bright pink and fresh gray, this 5.3-ounce T-shirt is of moderate thickness and made of 100% cotton. It is smooth to the touch and comfortable to wear. Available in S / M / L / XL / 2XL / 3XL / 4XL