This update includes:
Newly developed shock pistons
Newly developed shock plastic parts
Newly developed shock shafts
G300 includes the short shock-type shock stay (G215).
Newly Developed Shock Pistons:
The new 4-hole pistons are designed to provide more damping at higher piston speeds, resulting in a more stable car behavior and improved drivability.
The total hole area is the same as the 2 × 1.1 mm or 3 × 0.9 mm pistons, making it easier to quantify and tune your setup.
Newly Developed Shock Plastic Parts:
The damper ends now feature a flanged design, and the spring retainer system has been revised to allow for an additional 2 mm of stroke.
Two types of spring retainers are included: one with the same specification as the previous model, and one that lowers the spring position by 2 mm.
Lowering the spring allows it to move more freely, increasing grip.
Newly Developed Shock Shafts:
With revised shaft lengths—G299: 28.5 mm, G300: 25.5 mm—the new shock shafts, when used in combination with the newly designed plastic parts, enable the IF15-2 to utilize its full shock stroke potential.
Chassis Brace for IF14 Speciale – Flex Adjustment Made Easy
A dedicated brace that optimizes chassis flex characteristics near the front and rear bulkheads. Easily installed or removed with just two screws, allowing quick setup changes based on driving conditions.
Constructed from 2mm-thick high-quality carbon graphite, achieving both rigidity and flexibility.
1.5mm aluminum chassis designed for wide adaptability, from low-to-medium traction carpet surfaces to medium-to-high traction asphalt surfaces.
Engineered to deliver optimal chassis flex, precision-machined from high-quality 7075-T6 aluminum.
*Requires separate dedicated flat head screw set (TS149).
8.1mm titanium ball screw compatible with the new rear hub (for long arm) <G289>.
Middle type with 2.0mm longer screw length.
Ball diameter is optimized for the new rear hub.
*This product cannot be used with the conventional rear hub <G009B>.
INFINITY Team Hoodie has been renewed with the World Champion "4 Star" design!
The "4 Star" design represents the number of World Championships Team INFINITY has won. The design is a subtle yet proud reflection of Team INFINITY's brilliant achievements to date. Although it is a thin type, it is brush lined for a comfortable feel and excellent warmth retention. Seven sizes are available: S/M/L/XL/2XL/3XL/4XL.
Best suited double faced adhesive tape to attach RC devices such as receiver and speed controller onto objects. Appropriate flexibility to fit comfortably. Amazing compatibility of strong adhesion force and clear surface after peeling off. 20x100mm reed-shaped 4pcs. Thickness 0.75mm.
By mounting the body as close as possible without causing contact between the body and tires, you can improve steering characteristics and stability of the car in high-speed corners.
