![](http://www.creationmodel.net/catalog/3666-large_default/cm-a001-300-silicone-shock-oil-300-60cc.jpg)
![](http://www.creationmodel.net/catalog/3666-home_default/cm-a001-300-silicone-shock-oil-300-60cc.jpg)
![](http://www.creationmodel.net/catalog/3667-home_default/cm-a001-300-silicone-shock-oil-300-60cc.jpg)
![](http://www.creationmodel.net/catalog/3668-home_default/cm-a001-300-silicone-shock-oil-300-60cc.jpg)
![](http://www.creationmodel.net/catalog/3669-home_default/cm-a001-300-silicone-shock-oil-300-60cc.jpg)
The standard screws for the IF14-2 kit available in 10pcs packs. The screws used in all INFINITY kits are made of high performance steel and made in Japan. They are extremely stable and strong when tightened. Recommended not only as a spare part but also as a setting option.
By replacing the M3 screws used for mounting shock towers and motor mounts, chassis flex characteristics can be fine-tuned. Made of 64 titanium, lightweight and strong.
By replacing the spacers in the front and rear of the lower suspension arms, the lower suspension arms will operate more smoothly, leading to improved traction.
Two types of spacers, 0.5mm and 1.0mm thick, are available.
We carefully selected pure silicon oils and mixed them to produce smooth operation and stable traction.
Viscosity is precisely controlled during production to make setting-up always accurate and stable.
The standard screws for the IF14-2 kit available in 10pcs packs. The screws used in all INFINITY kits are made of high performance steel and made in Japan. They are extremely stable and strong when tightened. Recommended not only as a spare part but also as a setting option.
The ultra-lightweight machined aluminum grip is finished perfectly with the Team INFINITY logo and black and red anodizing. The overall thickness and knurling position have been optimized to provide an excellent grip. The tip is made of carbide steel and is perfectly sized to fit each size of screw head, making it the world's top team spec tool.
DISCONTINUED
This pit mat is made of a durable neoprene front complete with Infinity logo and the back of a non-slip rubber. Its moderate thickness and weight make it perfect for use in an indoor or outdoor pit area while remaining easy to fold for transportation. Size: 100cm x 60cm
High-precision machined aluminum spacer with black color alumite treatment. Larger outer diameter (8 mm) than standard aluminum spacers makes them suitable for use in locations where large forces are applied.
Replacement for #R0210
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
We carefully selected pure silicon oils and mixed them to produce smooth operation and stable traction.
Viscosity is precisely controlled during production to make setting-up always accurate and stable.
DISCONTINUED
New 2018 T-shirt for INFINITY Team Drivers
Stainless steel shim with an inner diameter of 3 mm, outer diameter of 4 mm, and thickness of 0.1 mm.
The outer diameter is smaller than that of a standard shim while maintaining an inner diameter of 3 mm, allowing you to make adjustments to the clearance of shafts and other parts that were previously not possible.
We carefully selected pure silicon oils and mixed them to produce smooth operation and stable traction. Viscosity is precisely controlled during production to make setting-up always accurate and stable.
Slim head screw machined from high quality 64 titanium material. For direct replacement of the steel rear body mount screws (R0120) of the IF18-2 and IF15W. Both lightweight and look cool.
Body pins that have been pre bent for easy handling. Includes 2 types (4 each) with different bending directions so that you can choose the mounting direction. For body posts with a diameter of 6 mm