By replacing the original kit plastic part with this high-precision 7075 machined part, all flex and deflection will be eliminated, resulting in excellent consistency and sharp steering characteristics.
Special rubber with excellent durability is used to achieve longer life than the soft rubber type of the kit's standard parts. Especially effective for IF15W with high grip wide tires.
This is a spare part for the G0125 B adjustable front one-way set. This set helps control the one-way well even with soft silicone oil. We also recommend replacing the conventional one with this spare part.
Replacement parts for G125 Adjustable front one way set. For use when cup and shaft see general wear and tare.
Features the same design shape as G154 rear shock tower (standard / carbon)
but designed to be used in combination with a specially developed short type shock.
The total shock length is shortened by 4 mm.
The suspension stroke is maintained the same as the std shock type, and combined with the lower center of gravity, this offers sharper cornering and increased reaction.
The body mount is 3.5 mm lower (one step of the body pin), which also contributes to lowering the center of gravity.
The shock mounting positions have been optimised to only the three inner positions, allowing for extra strength in this area in the event of a crash.
"Improved rigidity by using carbon-mixed nylon material. Improves steering response and enables increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, ""H"" mark is printed by laser engraving."
Improved rigidity by using carbon-mixed nylon material. Stabilizes the rear grip and allows for increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, the ""H"" mark is printed by laser engraving.
Please apply grease to the screw tightening areas when assembling in cold temperature environments.
Facilitates adjustment to reduce vehicle width when using wide offset tires.
"Improved rigidity by using carbon-mixed nylon material. Stabilizes the rear grip and allows for increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, the ""H"" mark is printed by laser engraving. """
This is a 9.5g chassis weight for IF15. By combining it with 14g and 28 chassis weights, the option parts already available, you can make finer tune-up.
G121-14 Chassis weight is 14g, half that of G0121 original optional chassis weight. Perfect for making finer setting adjustments. Can be used in all sliding weight positions and front bumper on IF15.
Oversized wheel hubs to better fit tires with large wheel hex mounting. Prevents misalignment and increases wheel stability. (Matrix tires recommended).
R0262, R0263 Repair parts for accessories. 1mm short type "G084 BALL NUT 4.9 mm", they can be used for height adjustment of each pivot part of IF15.
