There are 12 products.
This is a spare part for short shock G147 for IF15/IF15W. 2 hole - 1.1mm piston. (3 hole - 0.9mm piston and 1 hole - 1.3mm is also available.
This piston is secured with an ultra small screw as used in the IF14-2 to increase stroke.
A dedicated 0.05" inch size tool is required. (A0100) INFINITY 0.05" hex wrench driver.
This is an option part for short shock for IF15/IF15W. 3 hole - 0.9mm piston. (3 hole - 0.9mm and 2 hole - 1.1mm piston is also available.
This piston is secured with an ultra small screw as used in the IF14-2 to increase stroke.
A dedicated 0.05" inch size tool is required. (A0100) INFINITY 0.05" hex wrench driver.
Spare parts for repairing short shocks that can be used for IF15/IF15W.
Dedicated one O-ring specification.
The overall length has been reduced to the utmost limit to achieve a low center of gravity.
Teflon coated surface for smooth operation.
Spare parts for repairing short shocks that can be used for IF15/IF15W.
Overall length of 24mm.
This shock tower is used in combination with a specially developed short-type shock.
The suspension stroke is equal to that of the standard type, and combined with the low center of gravity, the shocks provide increased response and cornering.
The front and rear mounting positions are also carefully designed to keep the upper and lower mounting surfaces the same.
The upper fixing surface is offset by 1mm to keep the upper and lower mounting surfaces the same, the shape takes advantage of the machined A7075 material.
In the case of use with IF15W the racing body SMJ C235 can be optimized and mounted 3.5mm lower when using G147 short front shock set.
New rear shock tower features a body mounting position 3.5mm lower than std, contributing to a lower center of gravity.
By using T266 Alu HBP mount (black/2pcs) it is also possible to utilize horizontal style body mounting style.
The shock mounting positions have been reduced to 3 offering increased strength and crash resistance.
Features the same design shape as G154 rear shock tower (standard / carbon)
but designed to be used in combination with a specially developed short type shock.
The total shock length is shortened by 4 mm.
The suspension stroke is maintained the same as the std shock type, and combined with the lower center of gravity, this offers sharper cornering and increased reaction.
The body mount is 3.5 mm lower (one step of the body pin), which also contributes to lowering the center of gravity.
The shock mounting positions have been optimised to only the three inner positions, allowing for extra strength in this area in the event of a crash.
Used in combination with a specially developed short type shock.
The total shock length can be shortened by 4 mm.
The suspension stroke is maintained the same as the std shock type, and combined with the lower center of gravity, this offers sharper cornering and increased reaction.
Special rubber with excellent durability is used to achieve longer life than the soft rubber type of the kit's standard parts. Especially effective for IF15W with high grip wide tires.
For IF15 / IF15W
Developed based on team driver feedback
A new carbon camber plate that can be adjusted in fine steps. The diagonal direction of the holes incorporates the latest setups for the IF15.
The bottom hole is the same original hole 2 (lower), the more you raise it, the more calm the rear will be.
(Part of the outer ball end needs to be cut)
For IF15 / IF15W
Developed based on team driver feedback
Carbon camber plate (G159) that can be adjusted in a diagonal direction that incorporates the latest setups for the IF15.
In addition, the A-arm type camber link enhances rigidity and is a set of parts that greatly support rear grip.
The bottom hole is the same as original hole 2 (lower), the more you raise it, the more calm the rear will be.
(Part of the outer ball end needs to be cut)
