B03212 - M2x12mm CAP HEAD SCREW (10pcs)
The screws and E-rings included in the IF18-2 kit are now available for sale as individual items. The screws used in the INFINITY kits are made of high strength steel and made in Japan. The fit when tightened is perfectly matched to the IF18-2. Recommended as standard and also setting parts.
16 other products in the same category:
CM-A002-60 - SILICONE DIFF OIL 6000 (60cc)
We carefully selected pure silicon oils and mixed them to produce smooth operation and stable traction.
Viscosity is precisely controlled during production to make setting-up always accurate and stable.
CM-A001-450 - SILICONE SHOCK OIL 450 (60cc)
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
SMJ1314 - ULTRA EASY BODY CLIP 6mm (L, R each 4pcs)
Body pins that have been pre bent for easy handling. Includes 2 types (4 each) with different bending directions so that you can choose the mounting direction. For body posts with a diameter of 6 mm
B01304 - M3x4mm BUTTON HEAD SCREW (10pcs)
The standard screws for the IF14-2 kit available in 10pcs packs. The screws used in all INFINITY kits are made of high performance steel and made in Japan. They are extremely stable and strong when tightened. Recommended not only as a spare part but also as a setting option.
A73610P - ULTRA LOW FRICTION WASHER 3x6.5x1.0mm (8pcs)
By replacing the spacers in the front and rear of the lower suspension arms, the lower suspension arms will operate more smoothly, leading to improved traction.
Two types of spacers, 0.5mm and 1.0mm thick, are available.
B04303 - M3x3mm SET SCREW (Cup Point/10pcs)
The standard screws for the IF14-2 kit available in 10pcs packs. The screws used in all INFINITY kits are made of high performance steel and made in Japan. They are extremely stable and strong when tightened. Recommended not only as a spare part but also as a setting option.
B01306ST - M3x6mm TITANIUM SLIM HEAD SCREW (4pcs)
Slim head screw machined from lightweight and highly rigid 64 titanium.
The screw features a straight/non threaded section at its base, which allows for precise installation of various parts.
Recommended for top deck and shock tower installation.
CM-A002-150 - SILICONE DIFF OIL 15000 (60cc)
We carefully selected pure silicon oils and mixed them to produce smooth operation and stable traction.
Viscosity is precisely controlled during production to make setting-up always accurate and stable.
A0101 - INFINITY SNAP RING PLIERS (Internal and External/10-50mm)
DISCONTINUED
Dedicated tool for snap ring attachment and removal. Can be used for both internal and external snap rings. In addition to the straight type, 45° and 90° heads are included for access in difficult to reach spaces. Applicable snap ring size : 15-50mm (for both internal and external)
CM-A001-550 - SILICONE SHOCK OIL 550 (60cc)
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
B01308F-AR - M3x8mm ALU FLANGE BUTTON HEAD SCREW (Red/4pcs)
Spare parts for IF14-2 aluminum & Titanium screw set (T245). Also suitable as a wing attachment screw for 1/10 scale cars.
The screws and E-rings included in the IF18-2 kit are now available for sale as individual items. The screws used in the INFINITY kits are made of high strength steel and made in Japan. The fit when tightened is perfectly matched to the IF18-2. Recommended as standard and also setting parts.