A004-031 - 3x5x0.1mm SHIM (30pcs)

A new lineup of pinion gears for the IF18-2 with a hard coating on 7075 aluminium material. Offered in all teeth sizes to fine tune gear ratio according to the engine and track layout.

Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.

A vivid red anodized version has been added to the aluminum spacer series (3mm in inner diameter). It helps you dress up your machine. If you use this red anodized version and the black version in different specifications in a setting, you can easily distinguish them.

INFINITY silicone diff oil, formulated from pure silicone oil and carefully manufactured under strict viscosity control to provide the stability when making setup changes. Now available in 3000, 7000 and 9000 versions. The lineup now includes 3000 to 10000 in increments of 1000, allowing for finer tuning of the differential depending on track conditions.

The team T-shirts that INFINITY team drivers have been wearing for many years is now available in the latest “5-Star” version! The team T-shirt that has been the center of attention since it was worn by INFINITY team drivers is now available in the latest “5-star version” in two colors: bright pink and fresh gray. Available in two colors, bright pink and fresh gray, this 5.3-ounce T-shirt is of moderate thickness and made of 100% cotton. It is smooth to the touch and comfortable to wear. Available in S / M / L / XL / 2XL / 3XL / 4XL

The team T-shirts that INFINITY team drivers have been wearing for many years is now available in the latest “5-Star” version! The team T-shirt that has been the center of attention since it was worn by INFINITY team drivers is now available in the latest “5-star version” in two colors: bright pink and fresh gray. Available in two colors, bright pink and fresh gray, this 5.3-ounce T-shirt is of moderate thickness and made of 100% cotton. It is smooth to the touch and comfortable to wear. Available in S / M / L / XL / 2XL / 3XL / 4XL

High-precision machined aluminum spacer with black color alumite treatment. Larger outer diameter (8 mm) than standard aluminum spacers makes them suitable for use in locations where large forces are applied.

Replacement for #R0214

A parts case that contains two plastic cases with lids (outer dimensions 82x70x21mm).
The convenient size is perfect for storing aluminum parts and small parts for making setup adjustments. Since each case has a lid, it is also possible to store small screws and washers.

Team Infinity T-shirt USA edition. As worn at the 2019 IFMAR 1:8 ONROAD WORLD CHAMPIONSHIPS.

Black color original racing weight with Infinity logo. Supplied with double sided tape pre-installed, they are ready to use immediately after trimming. Each piece is compact in size and features smooth edges, perfect for adding additional weight into any RC car. 12x19x3mm (thickness does not include double-sided tape) 5g x 10pcs

Wheel reamer to widen the hole diameter of 1/8 GP racing car wheels to the optimum size.
If the wheel and axle shaft are too tight, it can cause problems such as not being able to install the wheel correctly or not being able to change tires efficiently during pit stops.
This wheel reamer is used by threading it through the hole in the wheel while turning it.

This INFINITY jumbo trolley bag is big enough to accommodate all your necessary equipment for RC races (70x48x28cm). Four pieces of INFINITY Plastic Cardboard Box (47x21.5x13cm) can neatly fit inside (not included). With the wheels and the retractable handle, you can easily carry this bag even stuffed full with heavy items.
* Make sure the total weight of the contents does not exceed 23kg to prevent any damage to the bag.

DISCONTINUED

New 2018 T-shirt for INFINITY Team Drivers