- New
- CARS
- IF11 - 1/10 FORMULA
- IF11-2 1/10 FORMULA
- IF14 - 1/10 EP TC
- IF14-2 - 1/10 EP TC
- IF14-2 FWD - 1/10 EP TC
- IF14-2 FWD RS - 1/10 EP TC
- IF14-2 TEAM EDITION
- IF15 - 1/10 GP TC
- IF15W - 1/10 GP TC WIDE
- IF15-2 - 1/10 GP TC
- IF18 - 1/8 GP ONROAD
- IF18-2 - 1/8 GP ONROAD
- IF18-3 - 1/8 GP ONROAD
- IFB8 - 1/8 NITRO BUGGY
- IF11 - 1/10 FORMULA
- SPARE PARTS
- OPTION PARTS
- Accessories
- Infinity 1/8 onroad
A0095 - INFINITY JUMBO TROLLEY BAG 2.0
This INFINITY jumbo trolley bag is big enough to accommodate all your necessary equipment for RC races (70x48x28cm). Four pieces of INFINITY Plastic Cardboard Box (47x21.5x13cm) can neatly fit inside (not included). With the wheels and the retractable handle, you can easily carry this bag even stuffed full with heavy items.
* Make sure the total weight of the contents does not exceed 23kg to prevent any damage to the bag.
16 other products in the same category:
B04305PT - M3x5mm TITANIUM SCREW PIN (4pcs)
By replacing the M3 screws used for mounting shock towers and motor mounts, chassis flex characteristics can be fine-tuned. Made of 64 titanium, lightweight and strong.
CM-A005-10 - ALUMINUM WASHER 3x6x1.0mm (Red/10pcs)
A vivid red anodized version has been added to the aluminum spacer series (3mm in inner diameter). It helps you dress up your machine. If you use this red anodized version and the black version in different specifications in a setting, you can easily distinguish them.
CM-A001-475 - SILICONE SHOCK OIL 475 (60cc)
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
R0252T19 - 0.8M 1st PINION GEAR 19T
A new lineup of pinion gears for the IF18-2 with a hard coating on 7075 aluminium material. Offered in all teeth sizes to fine tune gear ratio according to the engine and track layout.
A0070-RD-L - INFINITY 2019 Team "U.S.A." T-shirt (RD) L size
Team Infinity T-shirt USA edition. As worn at the 2019 IFMAR 1:8 ONROAD WORLD CHAMPIONSHIPS.
CM-A001-650 - SILICONE SHOCK OIL 650 (60cc)
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
B06212 - SNAP RING 12mm (6pcs)
The screws and E-rings included in the IF18-2 kit are now available for sale as individual items. The screws used in the INFINITY kits are made of high strength steel and made in Japan. The fit when tightened is perfectly matched to the IF18-2. Recommended as standard and also setting parts.
SMJ1146 - DOUBLE-SIDED TAPE (20x100mm/4pcs)
Best suited double faced adhesive tape to attach RC devices such as receiver and speed controller onto objects. Appropriate flexibility to fit comfortably. Amazing compatibility of strong adhesion force and clear surface after peeling off. 20x100mm reed-shaped 4pcs. Thickness 0.75mm.
A0084 - INFINITY PARTS CASE (4 divide)
A parts case that contains four plastic trays (outer dimensions 41x77x22mm).
Convenient for storing turnbuckles, rod ends, shocks, aluminum parts, etc.
A0076 - INFINITY SMALL PARTS CASE (8 Compartments/4pcs)
This parts case is convenient for storing small parts such as screws, washers and bearings. Comes with a set of label stickers that make it easy to identify the stored parts and remove them easily.
A0071B - INFINITY PIT MAT "IF Pattern" (100x60cm/Black)
INFINITY silicone diff oil, formulated from pure silicone oil and carefully manufactured under strict viscosity control to provide the stability when making setup changes. Now available in 3000, 7000 and 9000 versions. The lineup now includes 3000 to 10000 in increments of 1000, allowing for finer tuning of the differential depending on track conditions.
A2125 - INFINITY 2.5mm HEX WRENCH SCREWDRIVER
The ultra-lightweight machined aluminum grip is finished perfectly with the Team INFINITY logo and black and red anodizing. The overall thickness and knurling position have been optimized to provide an excellent grip. The tip is made of carbide steel and is perfectly sized to fit each size of screw head, making it the world's top team spec tool.