A gauge that accurately measures the amount the clutch nut has been tightened. This enables quick and accurate clutch setting when driving at the circuit. The tip is a precision machined aluminum part that supports accurate measurements.
New from Infinity is an original pit/cleaning towel. Known for their high quality production of towels they are made in Imabari Japan and offer extremely good water absorbency and a soft feel, great for all your pit/cleaning needs. Size: W1080mm x H205mm The towels come in two different designs: The IFS design is to commemorate the opening of the new INFINITY International Speedway Circuit in addition to the well know INFINITY designs. The IFS design will be limited and only available for sale at the INFINITY International Speedway Circuit.
A new lineup of pinion gears for the IF18-2 with a hard coating on 7075 aluminium material. Offered in all teeth sizes to fine tune gear ratio according to the engine and track layout.
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
A 30pcs pack of M3x6mm flat head titanium screws, as used in the Aluminum & Titainium screw sets. Precise 2mm hex hole size to reduce play when you insert the wrench, allowing you to tighten the screw firmly. A great value pack.
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
Wheel reamer to widen the hole diameter of 1/8 GP racing car wheels to the optimum size. If the wheel and axle shaft are too tight, it can cause problems such as not being able to install the wheel correctly or not being able to change tires efficiently during pit stops. This wheel reamer is used by threading it through the hole in the wheel while turning it.
A parts case that contains two plastic cases with lids (outer dimensions 82x70x21mm). The convenient size is perfect for storing aluminum parts and small parts for making setup adjustments. Since each case has a lid, it is also possible to store small screws and washers.
The screws and E-rings included in the IF18-2 kit are now available for sale as individual items. The screws used in the INFINITY kits are made of high strength steel and made in Japan. The fit when tightened is perfectly matched to the IF18-2. Recommended as standard and also setting parts.
UFO head screw machined from high quality 64 titanium material. Can be used to attach the anti-rollbar holder (T167) of the IF14-2 and IF14-2FWD. Both lightweight and looks cool.
With the INFINITY logo on the top and the team’s image colors of black and red, this cloth tool bag is very stylish. This versatile bag can be used for carrying hand tools and other various RC goods. Inside dimension: 18x10x6cm
INFINITY silicone diff oil, formulated from pure silicone oil and carefully manufactured under strict viscosity control to provide the stability when making setup changes. Now available in 3000, 7000 and 9000 versions. The lineup now includes 3000 to 10000 in increments of 1000, allowing for finer tuning of the differential depending on track conditions.
By replacing the spacers in the front and rear of the lower suspension arms, the lower suspension arms will operate more smoothly, leading to improved traction. Two types of spacers, 0.5mm and 1.0mm thick, are available.