CM-A001-400 - SILICONE SHOCK OIL 400 (60cc)

Multi purpose needle tool set. 4 tips included making these useful for many applications.

A new lineup of pinion gears for the IF18-2 with a hard coating on 7075 aluminium material. Offered in all teeth sizes to fine tune gear ratio according to the engine and track layout.

Wheel reamer to widen the hole diameter of 1/8 GP racing car wheels to the optimum size.
If the wheel and axle shaft are too tight, it can cause problems such as not being able to install the wheel correctly or not being able to change tires efficiently during pit stops.
This wheel reamer is used by threading it through the hole in the wheel while turning it.

A parts case that contains four plastic trays (outer dimensions 41x77x22mm).
Convenient for storing turnbuckles, rod ends, shocks, aluminum parts, etc.

DISCONTINUED

New from Infinity is an original pit/cleaning towel. Known for their high quality production of towels they are made in Imabari Japan and offer extremely good water absorbency and a soft feel, great for all your pit/cleaning needs. Size: W1080mm x H205mm
The towels come in two different designs:
The IFS design is to commemorate the opening of the new INFINITY International Speedway Circuit in addition to the well know INFINITY designs. The IFS design will be limited and only available for sale at the INFINITY International Speedway Circuit.

A foldable tote bag with a wide gusset section that allows you to carry large flat objects such as take-out lunches without tilting them. Made from a durable and supple fabric as used for tents. The surface is water repellent to keeps things dry on rainy days. Foldable to palm size its perfect to carry with you at all times. Size: W270×H260×D180mm

A 30pcs pack of M3x6mm flat head titanium screws, as used in the Aluminum & Titainium screw sets. Precise 2mm hex hole size to reduce play when you insert the wrench, allowing you to tighten the screw firmly. A great value pack.

We carefully selected pure silicon oils and mixed them to produce smooth operation and stable traction. Viscosity is precisely controlled during production to make setting-up always accurate and stable. 

Spare part

The screws and E-rings included in the IF18-2 kit are now available for sale as individual items. The screws used in the INFINITY kits are made of high strength steel and made in Japan. The fit when tightened is perfectly matched to the IF18-2. Recommended as standard and also setting parts.

INFINITY Team Hoodie has been renewed with the World Champion "4 Star" design!


The "4 Star" design represents the number of World Championships Team INFINITY has won. The design is a subtle yet proud reflection of Team INFINITY's brilliant achievements to date. Although it is a thin type, it is brush lined for a comfortable feel and excellent warmth retention. Seven sizes are available: S/M/L/XL/2XL/3XL/4XL.

Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.

We carefully selected pure silicon oils and mixed them to produce smooth operation and stable traction.
Viscosity is precisely controlled during production to make setting-up always accurate and stable.

We carefully selected pure silicon oils and mixed them to produce smooth operation and stable traction.
Viscosity is precisely controlled during production to make setting-up always accurate and stable.

DISCONTINUED

Team Infinity T-shirt USA edition. As worn at the 2019 IFMAR 1:8 ONROAD WORLD CHAMPIONSHIPS.

A parts case that contains two plastic cases with lids (outer dimensions 82x70x21mm).
The convenient size is perfect for storing aluminum parts and small parts for making setup adjustments. Since each case has a lid, it is also possible to store small screws and washers.