16 other products in the same category:
1/10 GP Touring Car World Championship
At the 2018 IFMAR 1/10 GP Touring Car World Championship (1/10 IC Track), five cars made it to the A main final, qualifying TQ and winning the championship. Four years after that amazing debut, at the 2022 IFMAR World Championship, nine IF15 prototypes made it to the A main final, qualifying TQ, Superpole, and winning, proving their overwhelming potential. The IF15 prototypes that achieved these amazing results are finally being made commercially available as the IF15-2!
The IF15-2, the most advanced 1/10 GP touring car in history and will take your racing to new heights!
Let's aim for the top together!
Cool carbon fiber ruler with 5-star INFINITY logo.
Made of carbon fiber, which is strong, lightweight, and has no distorstion due to heat, allowing for accurate measurements.
Available in two sizes: 15 cm and 30 cm.
Reviewed steering angle, front D.J.CVD drive shaft.
With use of aluminum bell crank (T093), smoothly can provide the drive power at wide steering angle.
Assemblage of wheel axle and drive shaft must be Ver.2 -to-Ver.2
Hex socket head screws machined from high-quality 6-4 titanium material.
With a larger head outer diameter (approximately 3.7mm) than the typical button head, they allow for secure fastening of parts.
Crafted from 7075-T6 alloy, these washers offer superior durability compared to the plastic ones provided in the kit, thanks to their hard coating.
The 45T spur gear contributes to boosting the top speed of your vehicle and may potentially reduce fuel consumption under specific conditions. Additionally, it aids in achieving a smoother power delivery on low-traction tracks.
The belt roller set will prevent skipping of rear belt of IF14.
When it occurs deflection under huge load on the belt, helps the belt to keep at proper position.
It provides stability of traction and brake control. It lengthens the life of belt.
※No combined usage with T095 REAR BALANCE WEIGHT.
The 9.5T rear spring is slightly stiffer than the stock spring (10.0T), providing added support to the rear end during acceleration and enhancing landing stability after jumps. This adjustment is especially effective for reducing rear grip or improving jump landings, offering advantages in specific driving conditions. By integrating this slightly stiffer spring, drivers can finely tune their car's handling characteristics to align with their preferences.
