SMJ1001 - SILVER LINE SPRING TS2.8 (Short/Blue/2pcs)

A floating electronics plate which allows the receiver, ESC and motor cooling fan to be easily installed and removed from the chassis. Helps ease of maintenance and allows for quicker chassis changes.

HBP (Horizontal Body Post) mount set. For mounting the body posts in a horizontal position at the rear end of the car. By mounting the rear body posts horizontally the center of gravity around the rear of the car is lowered and the downforce of the body is transmitted more efficiently to the chassis improving corner speed. Especially suited to tracks with tight corners.

This is a new set of super strong and high-precision 4.9mm titanium ball ends for the IF14-2.
Each set is about 8g lighter than the steel ones and the polished ball surface ensures the ball end moves smoothly for a long time.

Adjust the chassis flex by connecting this carbon brace between the upper bulkheads on top of the top deck. This upper bulkhead brace is cut with high precision from 1mm carbon plate and can change the steering and traction characteristics by effecting the rigidity of the front or rear bulkheads.

Front of top deck: Good balance between high-speed and low-speed corner.
Rear of top deck: Good balance between rotation and traction.

Spare Part for IF14-2 Team Edition

A lightweight DJ CVD cross spider using high strength super duralium (A7075) to reduce the weight by approx 36% compared with standard steel. High durability is also achieved by applying a hard alumite treatment. Used in combination with T227LW lightweight DJ CVD joint it is possible to reduce the weight by about 2g per driveshaft.

Spare part for floating electronic plate set. It can be used alone as a balance weight or can function as a chassis stiffener by adding one more screw to the chassis.

Spare parts fot T358.
Hex socket head screws machined from high-quality 6-4 titanium material.
With a larger head outer diameter (approximately 3.7mm) than the typical button head, they allow for secure fastening of parts.

This is a new set of super strong and high-precision 4.9mm titanium ball ends for the IF14. Each set is about 8g lighter than the steel ones and the polished ball surface ensures the ball end moves smoothly for a long time.

Spare Part for IF14-2 Team Edition