R0382S25 - SWAY BAR STOPPER 2.5mm (IF18-3/2pcs)

IFB8 shock stroke and rebound gauge. Allows easy measurement of important shock length while mounted on the vehicle during suspension setup. Supports stroke from 60mm to 150mm. Can also be used on vehicles other than IFB8.

The 25T steering servo horn, crafted from 7075-T6 alloy, offers exceptional robustness and precision. Featuring an M2 screw lock, it virtually eliminates play between the servo horn and servo, resulting in heightened steering precision and responsiveness.

Adding this spacer 1pc at each lower suspension holder, same rate can be derived with the eccentric bushing the position 0.5.
With this smart spacer, no need to taking off suspension holder for speedy operation.

The new suspension holder provides 0.5mm lower than kit normal hinge pin point. Possible to lower the roll center. Combination of roll center and toe angle option, setting range is widen.

Mounted in the opening at the rear of the main chassis, it increases chassis rigidity at the rear end of the chassis and increases weight by approximately 13g to ensure stable rear grip. It is also effective when the track surface is high grip and traction roll occurs.
Use with G230 Carbon Rear Stiffener Set to expand the range of setting.

Spare Part for T358

The carbon fiber center diff mount plate not only reduces weight on your vehicle but also enhances the rigidity and efficiency of the braking system.

Repair parts for R0394

The new suspension holder provides 0.5mm lower than kit normal hinge pin point. Possible to lower the roll center. Combination of roll center and toe angle option, setting range is widen.

Spare part for G260