T257 - FLOATING ELECTRONIC PLATE (Graphite)

Spare part for floating electronic plate set. It can be used alone as a balance weight or can function as a chassis stiffener by adding one more screw to the chassis.

High precision and high strength stainless steel lower arm shafts plated with a special lubricant to reduce resistance and provide ultra smooth suspension movement. Offers ultimate suspension performance.

Cooling fan mount made of composite material that is half the weight of aluminum and super lightweight.

HBP (Horizontal Body Post) mount set. For mounting the body posts in a horizontal position at the rear end of the car. By mounting the rear body posts horizontally the center of gravity around the rear of the car is lowered and the downforce of the body is transmitted more efficiently to the chassis improving corner speed. Especially suited to tracks with tight corners.

This spacer sits between the lower suspension block and the chassis to adjust the roll center. With a thickness of 0.2mm it's possible to achieve fine detailed setup.

When using the HBP mount it can be difficult to accurately position the rear body post holes in the bodyshell. By using this rear body height fitter it is quick and easy to precisely position the body post holes at the desired body height.

Spare Part for IF14-2 Team Edition

C-Hub set with added mounting holes for the body upstop (T358). Be sure to use T332B when using T358.
* The conventional T332 will be discontinued once the stock runs out.

A lightweight DJ CVD cross spider using high strength super duralium (A7075) to reduce the weight by approx 36% compared with standard steel. High durability is also achieved by applying a hard alumite treatment. Used in combination with T227LW lightweight DJ CVD joint it is possible to reduce the weight by about 2g per driveshaft.