T259 - ALU COOLING FAN MOUNT (Rear/Black)

An aluminum cooling fan mount that allows a 40mm or 30mm fan to be bolted behind the motor.

16 other products in the same category:

T301 - USP GRAPHITE FLEX FRONT SHOCK TOWER

By reducing the rigidity of the front shock tower connecting point to the upper bulkhead, the stiffness around the front bulkhead section is reduced and the overall chassis flex is increased, resulting in a calmer initial steering response. This reduction in initial stiffness helps smooth out cornering and can help reduce tyre wear.

T092 - ALU ADJUSTABLE SERVO HONE (for FUTABA)

Adjustable the range of servo horn four stages at 17, 18, 19, 20mm. Since leverage can be set fixed, the setting is possible in a quantitiative way.
Exquisitely machined from High-intensity alloy aluminum. Can fit to other chassis than IF14. (25 spline)

T113 - D.J.CVD JOINT COVER TUBE (10x50mm/2pcs)

It is preventable G-Clip accidentally comming off during running.
Its approx. of 0.2mm thickness provide no weight extendability.
Shutterproof of grease and lenghtening life-span of the parts and maintenance cycle.
Cut about 10mm for each. Fitting on effectively, provide little heating after inserted.

T307H - LOWER SUSPENSION ARM SET (IF14-2/Hard)

A full set of lower suspension arms (hard) for IF14-2 and IF14-2FWD for one car.
This set is convenient when you want to replace lower suspension arms together for maintenance. It is also more economical than purchasing each item individually.

T270 - LIGHT WEIGHT D.J.CVD CROSS SPIDER (4pcs)

A lightweight DJ CVD cross spider using high strength super duralium (A7075) to reduce the weight by approx 36% compared with standard steel. High durability is also achieved by applying a hard alumite treatment. Used in combination with T227LW lightweight DJ CVD joint it is possible to reduce the weight by about 2g per driveshaft.